เครื่องผลิตน้ำบริสุทธิ์สูง ( Ultra-Pure Water Machine System) ระบบ Reverse Osmosis แบบ Two-Pass RO ชนิด Direct Feed สำหรับการฟอกเลือดด้วยเครื่องไตเทียม โดยสามารถผลิตน้ำบริสุทธิ์ที่มีคุณภาพตามมาตรฐาน AAMI เพื่อไม่ให้เกิดภาวะแทรกซ้อนต่อผู้ป่วยและสามารถผลิตน้ำบริสุทธิ์สูง ( Ultra-Pure Water ) ที่มีคุณภาพตามมาตรฐาน ASTM Standards : D1193-99 Standards Specification for Reagent Water
คุณลักษณะเด่นของเครื่อง
| Model Number | SuperPure - 24K | SuperPure - 48K | SuperPure - 72K | SuperPure - 96K |
| Design Parameters | ||||
| Design Type | Direct Feed | |||
| ProductFlow @ 25°C (LPH) | 1,000 | 2,000 | 3,000 | 4,000 |
| Operating Temp | 50-80°F (10-27°C) | |||
| System Recovery | 50 -75% | |||
| Feed Pressure | 30-80 PSI | |||
| Membrane 40” | (3) 8” | (6) 8” | (9) 8” | (12) 8” |
| Electrical Load KW | 60 | 85 | 120 | 135 |
| Sanitization | Chemical & Ozone | |||
| Dimensions Inch (CM) | ||||
| L x D x H | 450 x 150 x 240 | 480 x 180 x 240 | 520 x 200 x 240 | 540 x 200 x 240 |
| Operating Weight (KG) | 4,800 | 5,000 | 5,500 | 6,500 |
| General Materials of Construction | ||||
| Pumps | 316 SS / Cast Iron / Tungsten carbide / Carbon / EPDM / Viton or Silicon carbide (Q) / | |||
| Silicon carbide (Q) complete with EPDM (E) seals | ||||
| Piping | 304 / 316L SS Stainless Steel | |||
| Raw Water Tank | 304 SS Stainless Steel | |||
| Multi Media Tank | 316L SS Stainless Steel | |||
| Water Softener Tank | 316L SS Stainless Steel | |||
| Carbon Filter Tank | 316L SS Stainless Steel | |||
| 20 micron / 5 micron filter Tank | 316L SS Stainless Steel | |||
| RO Housings | 304 / 316L SS Stainless Steel | |||
| Valves | 316 SS / PTFE | |||
| Sensors | 316 SS / PTFE / EPDM | |||
| Fittings | 304 / 316 SS Stainless Steel | |||
| Pipe Thread Seal | 304 / 316 SS Stainless Steel | |||
| Panel | 304SS Stainless Steel | |||
| Frame | 304SS Stainless Steel | |||
| Connections | ||||
| Feed Water | 2” | 2” | 2” | 2” |
| Product Water TC | 3/4” | 1” | 3/4” | 3/4” |
| Waste Water -Flanged | 2” | 2” | 2” | 2” |
| Electrical | 380V/3-ph/50Hz | |||
| Typical Treated Water Quality* | ||||
| Standard USPure Meets current USP | USPure with 0.05 UF Option | |||
| standards for Purified Water | Meets req. for Highly Purified Water | |||
| Conductivity | ||||
| TOC | ||||
| Bacteria | < 10 cfu/ml | < 10 cfu/ml | ||
| Endotoxins | N/A | |||
| USP Standards for Water Purity | ||||
| USP Purified | USP WFI | |||
| pH | 5.0 - 7.0 | 5.0 - 7.0 | ||
| Conductivity* | 1.3 μS/cm | 1.3 μS/cm | ||
| TOC | 500 ppb | 500 ppb | ||
| Bacteria | 100 cfu/ml | 10 (cfu/100mL) | ||
| FDA Action Limit | 100 cfu/ml | 10 (cfu/100mL) | ||
| Endotoxins | N/A | |||
| System Feed Water Requirements* | ||||
| Maximum Silt DensityIndex | < 3 | |||
| Maximum Free Chlorine | < 3 ppm | |||
| Operating Temperature | 10-27°C | |||
| Operating pH Range | 3-10 | |||
| Total Dissolved Solids | < 600 ppm | |||
| Iron / Manganese | < 0.1 ppm | |||
| * Feed water analysis required for final design | ||||
